Jump to content
Long time no see.. Read more... ×

All Activity

This stream auto-updates     

  1. Today
  2. mac_1au

    Unhappy - feedback needed

    Unhappy with what exactly? You must have had some idea of what you were gonna get and must have seen stencils or some sketches at a bare minimum before ink hit your skin 🤔
  3. Yesterday
  4. Orlando

    Unhappy - feedback needed

    Fullsleeve with japaneese elements with a dragon as central theme on the shoulder. Additionally roman numerals (1976 - year of the dragon) and a saggitarius with the name of my son as a banner. On my forearm I got a chrysanthemum. Tattoo is now 4 weeks old and took 21 hours. Any feedback is welcome.
  5. M.helena95

    New tattoo ideas?

    I have a tattoo on the forearm and I would like to hear ideas from you all as to what I should I add to it. I currently have a rose and rosary. I would like for the theme to be about faith or anything else that brings hope. Thanks.
  6. Got a touch up (2 lines fixed) its been a week going on 2. They say the peeling stage begins the second week. I see no sign of peeling but it does itch every now and then. Is it normal not to peel during the healing stages?
  7. M.helena95

    Is it normal not to peel?

    Got a touch up (2 lines fixed) its been a week going on 2. They say the peeling stage begins the second week. I see no sign of peeling but it does itch every now and then. Is it normal not to peel during the healing stages?
  8. SpaceWolf

    Aspiring tattoo artist from the UK 😃

    Wow, you have some great drawings! I'm brand new here too. Thanks for sharing and good luck finding an apprenticeship.
  9. Hey guys, So my name is Bonnie and I'm based in the south of England in the UK. I'm an aspiring tattoo artist to be and I've been searching for an apprenticeship for some time now with no luck. Didn't realise it would be super hard to find one :) anyways here's a link to my Instagram is love you all to have a look. :) https://www.instagram.com/bonniemxwll/ Really nice to be part of this community.
  10. With the opening of the market and the acceleration of the integration of China's juice production line machinery industry with the world, the future high-end products will be the market high ground for international competition, and the juice production line will be more automated and technological. For more than 20 years, China's juice industry has grown from small to large, and has begun to take shape, becoming one of the key industries in the food industry that have a certain foundation and can better adapt to market needs. The rapid development of Juice Processing Plant has made due contributions to the national economic construction and the improvement of people's quality of life. Fruit juice has become an indispensable consumer food in people's daily life. Different juice production line processes require different juice machinery and equipment. The following are some common and commonly used mechanical equipment in the juice production process. Water is the largest raw material used in juice production, and the quality of the water has a great impact on the quality of the juice. Therefore, water must be treated to meet process requirements. Water treatment equipment is generally classified into three categories according to its function: water filtration equipment, water softening equipment, and water disinfection equipment. Choose Shanghai Jimei Food Machinery Co., Ltd., we are the most professional food and beverage equipment supplier, choose us to bring you a comprehensive service experience. Now we are increasing the investment in innovation and research and development of the Milk Powder Making Machine in order to make our customers have a better experience.
  11. i've been tattooing for a while longer then 2 years now. never worked at a shop and learned everything from the internet and practice. now i'm having some questions and maybe someone can help me out. - when i shade/color (7RM), it looks very scratchy (do i have to make smaller circles while putting color in?, machine to slow?) - sometimes my lines are less thick then at other points of the line. (speed of movement?, Not consistent in depth?) this is on my own arm, but wasn't able to use my other hand. so i had to tape up my arm to stretch my elastic skin. but there you can see the scratchy-ness what i mean. i would appreciate all tips to improve!
  12. Last week
  13. Lyfted_

    Just made my own clip cord

    What would you guys suggest as a good good gauge wire? And does it need to be speaker wire? (From what ive seen and come across) Any suggestion would b cool, im making my own clip cord and trying to see which will make my machine run fastest with lowest voltage on PS, good or bad idea?
  14. SpaceWolf

    New in town

    How goes it? Wanted to introduce myself seeing as the forum has a section for it. Names AJ, I'm an American living in Japan for work currently. In the business of airfields. Spent my entire life drawing, every day or two for the most part, married to a fellow artist. Friends have been telling me for years I should get into tattooing (bastards probably just want free ink). Life's been busy, been around the world, some nice parts, some shitty. Got married, had a few kids, working away in a boring career. I've acquired a bit of ink over the last few years, best time was immediately after my wedding ceremony. Always been fascinated by it, the perfect mix of artistic ability and tactile technical expertise. So I decided to make some space in life to learn how to tattoo. I'll gladly give full disclosure about where I'm at with it. I'm building a kit based on daily research and what I can afford. Been hitting up some practice skin when I get a few free hours to set everything up but don't have a dedicated space to leave anything out (twin one year old boys crawling around). I refuse to put ink under skin until I have full confidence in my knowledge of sanitizing and operational cleanliness. Then my own skin, and possibly my wife's to follow. We both have tattoos that need finishing or improvement. All in all, happy to be here, love the vibe and how you guys and gals lay into the people who ask questions without doing ANY research prior. Hopeful to learn and maybe someday be able to contribute. Cheers!
  15. Jeffrey

    Jeffrey

    Hi Guys I got a tattoo , my first at Needle Asylum in Cardiff. Simon was brilliant as i'''m 60! So I got some words of Dylan Thomas - what next..I'mmaking up for lost tattoo time! suggestions ? Jeffrey
  16. Jasperart

    Tattoo practice.jpg

    Hi, my name is Jasper and I enrolled in a tattoo class a few days ago, I hope to become a professional tattoo artist one day, here are my very first attempts with a tattoo machine!!
  17. mark101

    Tattoo Ideas

    Lol might see plenty of tattoos containing all of those if you add tattoo after it
  18. mac_1au

    Tattoo Ideas

    Yeah, google all that shit, you’ll find something you like 😉
  19. Fallenfantasy

    Tattoo Ideas

    I need tattoo ideas, I want to get my first tattoo soon and I was thinking of something dark and witchy, I like black cats and Halloween themed stuff. Jack o lanterns, witch cauldrons, ravens, Ouija boards, and just overall stuff like that. I also like Wicca, nature themed stuff like moths, or crescent moons. Does anyone have any ideas???
  20. 1. Juice Production Line control liquid level height quantitative method This method is to control the height of the liquid level in the filling container to achieve quantitative filling. The volume of the filled material is equal to the volume inside the bottle, and the volume of the bottle is used to determine the filling amount. This method is not only simple and easy to operate, but also does not require the assistance of other equipment, but because the volumetric accuracy in the bottle has a great influence on the filling accuracy, Therefore, the measurement accuracy is low. 2, juice production line quantitative cup quantitative method The main filling process is to inject the liquid into the dosing cup and then inject the liquid into the bottle. This method is generally not suitable for filling products with lower viscosity such as alcohol. 3. Quantitative pump quantitative method for juice production line This is a quantitative method called pressure method, which uses power to control the movement of the piston, then draws the material from the storage cylinder into the piston cylinder, and then injects it into the container through pressure. In addition, it uses a soft film under gas pressure. Under the action, the material is sucked from the tank into the filling chamber and then injected into the container. Shanghai Jimei Food Machinery Co., Ltd. is a professional food equipment supplier. We have been providing various advanced and professional equipment for the Juice Processing Plant for many years. We also welcome more customers to come to leave a message, I believe we can meet More customer needs.
  21. 1. Juice Production Line control liquid level height quantitative method This method is to control the height of the liquid level in the filling container to achieve quantitative filling. The volume of the filled material is equal to the volume inside the bottle, and the volume of the bottle is used to determine the filling amount. This method is not only simple and easy to operate, but also does not require the assistance of other equipment, but because the volumetric accuracy in the bottle has a great influence on the filling accuracy, Therefore, the measurement accuracy is low. 2, juice production line quantitative cup quantitative method The main filling process is to inject the liquid into the dosing cup and then inject the liquid into the bottle. This method is generally not suitable for filling products with lower viscosity such as alcohol. 3. Quantitative pump quantitative method for juice production line This is a quantitative method called pressure method, which uses power to control the movement of the piston, then draws the material from the storage cylinder into the piston cylinder, and then injects it into the container through pressure. In addition, it uses a soft film under gas pressure. Under the action, the material is sucked from the tank into the filling chamber and then injected into the container. Shanghai Jimei Food Machinery Co., Ltd. is a professional food equipment supplier. We have been providing various advanced and professional equipment for the Juice Processing Plant for many years. We also welcome more customers to come to leave a message, I believe we can meet More customer needs.
  22. Toysoldiers

    New and hello - looking for tattoo artist

    Not sure where the pictures I posted has gone.
  23. Hi all, I am looking for a tattooist in London for the pictures below that I have added. I am currently in the progress of lasering off both 3/4 sleeves I have to have them redone. I really want to get it right this time so I was hoping I can get the help and support to be able to find the correct tattoo artist. It is a Japanese style tattoo which does not look like the traditional tattoo, I guess it has a touch of realism to it? I may need to repost this else where in the forum, so any help will be great. Thanks and glad to be here.
  24. mark101

    New guy from N.C.

    Be nice to have someone to talk fishing too
  25. What does the manufacturer say
  26. Earlier
  27. Although there are many enterprises producing filling and beverage machinery in the country, some small and medium-sized enterprises generally have problems of backward technology and equipment. In order to carry out technological transformation, some Juice Processing Plant have to spend a lot of money to introduce some sets of advanced food packaging production lines with advanced technology, high production efficiency and high packaging precision, resulting in a large part of the domestic market share being occupied by foreign brands. The development space of China's filling machinery is still vast, and the level of packaging technology for juice beverage production lines needs to be urgently developed. In order to adapt to the large-scale production of the beverage industry, in order to obtain the best economic benefits, beverage equipment is increasingly becoming larger. For example, the filling speed of carbonated beverage filling equipment can reach up to 2000 cans/min. Mechanical mechatronics is the most important trend in the development of beverage machinery and equipment. Programmable controllers are widely used in the control system of beverage machinery and equipment. Large-scale equipment is controlled by computer, self-diagnosis of faults, signal display, and realization of intelligence. The production equipment has high technical content, high reliability, high self-control level of the whole production line and high efficiency of the whole line. The on-line detection device and the metering device are fully equipped, and can automatically detect various parameters and measure accurately. High-tech products integrating machine, electricity, gas, light and magnetism are constantly emerging. The reliability of the beverage packaging equipment and the coordination of the packaging line directly affect the work efficiency, production cost and product quality of the entire production line. The research and development strength of the juice beverage industry is weak, and the corresponding majors of research institutes and universities in the industry are relatively few. Some cutting-edge technologies in the industry, such as ultra-low temperature, ultra-high pressure, membrane separation, supercritical extraction, radiation, vacuum, etc., are incapable of being completed by only one institution, and enterprises are urgently required to invest funds. The research and development model of the combination of production, learning and research advocated in the past has not been successful in the industry, and the limited scientific research strength has not fully played its role. The juice production line strongly needs scientific research support. Shanghai Jimei Food Machinery Co., Ltd. is a food machinery equipment supplier specializing in innovation and scientific research. Our Milk Powder Making Machine is constantly improving its own production technology. Welcome customers who have needs to contact us, I believe you can do it for you. Bring a satisfactory service.
  1. Load more activity
×