Guidelines for Giving Feedback
Guidelines for Giving FeedbackPlease consider the following when giving feedback on a member's tattoo:
Line work: Does the artist seem to have grasped the technique of applying smooth, consistent lines? Do the lines flow with no shakes, skips or blow-outs?
Fill: Are all color and black areas a consistent color?
Shading: Does the tattoo show smooth gradients and transition effectively from light to dark?
Color Harmony: Does the tattoo have colors that compliment each other?
Placement/Size: Does the tattoo seem to be the right size for the area chosen? Is it centered and lined up with any other work? Does it go with the flow of the body?
Design: How well does the overall design work? Does it have sound composition? Does it feel well thought out?
Feedback: What areas could be improved?
New Build, kaplan frame |
 Nov 3 2009, 01:34 PM
Post
#1
|
|
|
|
this is my new color packer.
brass kaplan diamond back frame. .45 slug front binder 10 wrap coils that i wanted to match the frame,so i wrapped with an old 2 dollar canadian bill thats no longer in circulation,had it laying around. a-bar from an i.t.s. machine.super big and heavy,nice for color packing and the spring saddle is also a phono jack.i run all my machines on phono. this is the first machine ive put together where i madee my own coils for,even though ive been making coils for a minute now. thanks for lookin,and comments 
-------------------- I wash my hands before i touch my dick.
|
 |
 
|
 |
Replies
(1 - 17)
|
Nov 3 2009, 01:36 PM
Post
#2
|
|
|
|
come on stop teasing and post more pics....
|
|
|
|
|
Nov 3 2009, 01:39 PM
Post
#3
|
|
|
|
QUOTE (yorkshire paul @ Nov 3 2009, 01:36 PM)  come on stop teasing and post more pics.... lol my camera is garbage,ill try and take a few more angles and post em up,but when i do you tell me what you really think -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 3 2009, 01:43 PM
Post
#4
|
|
|
|
ill be honest fella...how does it run and have you had it on skin yet?
|
|
|
|
|
Nov 3 2009, 01:57 PM
Post
#5
|
|
|
|
QUOTE (yorkshire paul @ Nov 3 2009, 02:43 PM) ill be honest fella...how does it run and have you had it on skin yet? here ya go.runs like a beast at 6.5-7   
-------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 3 2009, 02:08 PM
Post
#6
|
|
|
|
yes i like it...not into the phono jack but the machine looks sweet...how heavy is it btw?
|
|
|
|
|
Nov 3 2009, 02:17 PM
Post
#7
|
|
|
|
QUOTE (yorkshire paul @ Nov 3 2009, 03:08 PM) yes i like it...not into the phono jack but the machine looks sweet...how heavy is it btw? pretty friggin heavy.my scale is for,ughhhh.i dont have a scale,so the machine is too heavy to be weighed on it lol -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 3 2009, 02:19 PM
Post
#8
|
|
|
|
QUOTE (yorkshire paul @ Nov 3 2009, 03:08 PM) yes i like it...not into the phono jack but the machine looks sweet...how heavy is it btw? dude,btw phono is sooooo much more comfortable then a clip cord.i cant go back now.have the clip cord hitting my wrist,even flying out sometimes.fuck that noise -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 10 2009, 11:08 AM
Post
#9
|
|
|
|
whats going on under those coils ?
rear looks like its got a brass washer front looks like some spring material? |
|
|
|
|
Nov 10 2009, 12:03 PM
Post
#10
|
|
|
|
QUOTE (mark101 @ Nov 10 2009, 11:08 AM) whats going on under those coils ? rear looks like its got a brass washer front looks like some spring material? lol no,if you look carefully (sorry for the shitty pic.thats the lead wrapping around the coil,both have same brass washers,just one under rear.2 under front.they are blocked by that lead i assure you edit:remember just starting out,so placed my holes to close together in the front one.instead of going 12 and 3 or 4,i went 12 and 2 or there abouts This post has been edited by fatcount: Nov 10 2009, 12:05 PM -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 10 2009, 12:20 PM
Post
#11
|
|
|
|
heres how it looks now in its final stage,minus the clearcoat for the coils.i wasnt feeling how the first set were looking in there,plus were running high volts.now this bitch is a jackhammer at 6-6.5
heres the coils.wait till theyre clear coated.those washers will be so bright,and popping.whooo.cant wait.  heres the machine.note the two washers in fromt,and i noticed,when you know thats a lead and look carefully you can see the washers behind it in the first pic asked about  thanks for looking.keep the replys and crits coming please.i can only learn from em P.S. Mark,youd have been better off asking me i used two thin yokes in the first one,instead of a proper yoke that was the right size,instead of two that were half the size needed in the first pic asked about lol. answer:because i didnt have a proper 1/8 yoke at the time,just many super skinny ones+one half 1/8.now its rocking a gun blued firehorse irons yoke Count This post has been edited by fatcount: Nov 10 2009, 12:48 PM -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 10 2009, 12:38 PM
Post
#12
|
|
|
|
oh and by the way,its a shader now
-------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 10 2009, 02:52 PM
Post
#13
|
|
|
|
Hey fatcount,that 45 slug binder is nice ,can i ask how you did that
-------------------- Strick9
|
|
|
|
|
Nov 10 2009, 03:35 PM
Post
#14
|
|
|
|
QUOTE (strick9 @ Nov 10 2009, 02:52 PM) Hey fatcount,that 45 slug binder is nice ,can i ask how you did that i know a guy.he does sell them but they arent very affordable,i buy 10-20 at a time and get a good deal,i assume casue we consider eachother friends,as the first ones i ever got from him were free,brass,and chrome plated brass.a set each after he extensively explained what iut was,then finally was like gimmie ur address.i decided to pay him back by buying stock from him.i personally dont like em that much.but they are affordable for me.plus the novelty factor helps with undecided buyers SHORT ANSWER: hes around,gonna have to do a tiny bit of legwork to find him -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 10 2009, 09:25 PM
Post
#15
|
|
|
|
-------------------- |
|
|
|
|
Nov 10 2009, 09:38 PM
Post
#16
|
|
|
|
QUOTE (punkfloyd @ Nov 10 2009, 09:25 PM) thanks punk,thats super sweet of you.i had already told him in a pm but thats inconsequential now as i wont have to send out anymore PMs due to your awsome contribution in this thread. anyways thanks alot for taking the time out of your day to post that up,much appreciated -------------------- I wash my hands before i touch my dick.
|
|
|
|
|
Nov 11 2009, 11:37 AM
Post
#17
|
|
|
|
non ferrous-ferrous-non ferrous
makes no sense are you waiting for shims? This post has been edited by mark101: Nov 11 2009, 11:40 AM |
|
|
|
|
Nov 11 2009, 12:14 PM
Post
#18
|
|
|
|
QUOTE (mark101 @ Nov 11 2009, 11:37 AM) non ferrous-ferrous-non ferrous makes no sense are you waiting for shims? yes thicker ones.the only ones i have are eikons thinnist shims.id have to stack atleast 6 to 10 to get the height i need there.and to be honest,i mean im sure the presence of iron has to help,but i cant tell a difference between using brass washers,and steel/iron shims,as far as how the machine runs -------------------- I wash my hands before i touch my dick.
|
|
|
|
 |
| Lo-Fi Version | Time is now: 15th March 2010 - 03:18 AM |
Skin designed by IPB Forum Skins